LX/LC Hellcat L3 Triple Pump Fuel System by Fore Innovations

Description
Product Fitment
Reviews (0)

Boost Referenced Return System for 1800+ rwhp. Regulator mounted before rails. (pre-regulated) Parallel feed to fuel rails, with plug on end of each rail. We generally do not recommend this configuration since fuel vapor is trapped in the rails during starting and the fuel density may be inconsistent due to fuel stagnation.

This fuel system includes:

LX / LC Hellcat Fuel Pump Module (triple pump)
F4i Fuel Pressure Regulator
88mm Inline Fuel Filter
Billet Hellcat Hemi Fuel Rails
LX / LC Hellcat OE Feed Line Blockoff Plug
All fittings, hose, hardware required for typical fuel line plumbing

30 feet of fuel line and 10 matching hose ends (your choice)
Qty 6, billet low profile 90 degree o-ring fittings
Qty 4, straight AN to ORB fittings
Qty 3, -8 ORB plug
Qty 2, -8 ORB 1.25" o-ring port extensions
Qty 10, hose straps and mounting screws

Notes on Hellcat OE Fuel Pressure Sensor Options:

By default, our fuel system will delete the OE fuel pressure sensor. Due to popular request, we have added the following provisions for the fuel pressure sensor, which must be selected by the purchaser:

Delete OE Fuel Pressure Sensor
Inline Aftermarket Sensor: includes a new AC Delco sensor and provisions to mount in a high flow coupling with two more hose ends. In L2 and L4 systems, this can be installed without extending the OE electrical harness; however, extension of the OE harness may still be required on L3 systems.
Regulator Mounted Aftermarket Sensor: includes a new AC Delco sensor and an adapter to mount directly on the fuel pressure regulator. The installer will have to extend the OE electrical harness to accommodate the new location of the sensor.

2015+ Charger SRT Hellcat
2015+ Challenger SRT Hellcat

***will not fit non Hellcat versions (see our standard LX / LC / LD fuel systems)***

***will not fit Hellcat Redeye (see our Demon / Redeye fuel system)***

*Platform (required)
2018-2021 Demon, Redeye, Jailbreak, Add $720.00
OE Hellcat
SRT / RT (Hellcat engine swap), Add $112.00

*Fuel Rail Option
For OE 2.4L Supercharger
Delete for Magnuson, L3 system, Add $411.00
For OE 2.7L Supercharger
For Kenne Bell Bigun
For Kenne Bell Mammoth, Add $31.00
For Whipple 4.5L, Add $31.00
Delete for Whipple 3L Stage 2, Subtract -$435.00
Delete Fore Hellcat Fuel Rails, Subtract -$435.00

*Primary Fuel Pump
Walbro GSS342 G3, Add $85.00
Walbro GSS352 G3, Add $95.00
TI Auto F90000267, Add $110.00
TI Auto F90000274, Add $115.00
TI Auto F90000285, Add $150.00

*Secondary Fuel Pump
2 x Walbro GSS342 G3, Add $170.00
2 x Walbro GSS352 G3, Add $190.00
2 x TI Auto F90000267, Add $220.00
2 x TI Auto F90000267, Add $230.00
2 x TI Auto F90000285, Add $300.00

Electrical Upgrades
Circuit breaker upgrade, Add $10.00
None (I have my own fuses, wiring, relays, etc)
Pump power pigtails only, Add $25.00
FC2 Controller with wiring, Add $209.00
FC3 Staged Controller with wiring, Add $249.00

Call Today: 276.666.1934

Over 40 Years of HEMI Experience!

LX/LC Hellcat L3 Triple Pump Fuel System by Fore Innovations

*Fuels
Gasoline / race gas (<15% ethanol)
Ethanol blends, gasoline, race gas

*Filtration Media
Cellulose
Microglass SSD, Add $19.00
Stainless Steel, Add $32.00

Fuel Filter Upgrades
Upgrade to 128mm Filter, Add $30.00
Add billet mounting bracket, Add $45.00
Add filter monitoring gauge and fitting, Add $59.00

*Hellcat Fuel Pressure Sensor
Delete OE Fuel Pressure Sensor
Inline Aftermarket Sensor, Add $86.00
Regulator Mounted Aftermarket Sensor, Add $52.00
Redeye OE fuel pressure sensor adapte, Add $49.00

System Options
0-100 psi Fuel Pressure Gauge, Add $30.00
Honeywell Pressure Switch for FC3, Add $74.00
Flex fuel sensor intercept kit, Add $69.00
Boost / Vacuum Manifold kit, Add $77.00

Tools
Include 6mL tube of Loctite 567, Add $8.50
Include black touch-up pen, Add $7.00
AN soft jaws and wrench set, Add $63.00

*Fuel Lines
PTFE -8 Feed / Return
FlexLP -8 Feed / Return

Fuel Lines Upgrade
Upgrade to -10 Feed, Add $65.00